How To Remove Camera Lens On Blackberry 9800

Repair Guides

Blackberry Z10 Repair Guide

June 4, 2018 | 0 Comments

Blackberry Z10 Repair Guide

Repair a damaged screen or other internal components on your BlackBerry Z10 using this detailed take apart guide provided by RepairsUniverse. This guide will walk you through each step of disassembling your BlackBerry Z10 and explain how to replace damaged parts.

This guide volition help you to install the following BlackBerry Z10 part(s):

BlackBerry Z10 LCD + Touch Screen Digitizer
BlackBerry Z10 Audio Ability Button Flex
Other Z10 Parts

Tools Required:

T4 Torx Screwdriver
Pentalobe Screwdriver
Agglutinative Strips (for screen repairs)
Hot Air Gun / Hair Dryer

BlackBerry Z10 Repair Guide:

Begin by removing the back embrace. Yous can do this past using the pry tool and only pull off the back encompass from the bottom of the device
Remove the bombardment, sim carte, and memory menu.
There are nine T4 screws that need to be removed on the back housing of the device
Using the pentalobe screwdriver you volition need to remove ii screws located on the very left side border
In one case y'all have removed all of the screws you lot can then release four clips on each corner of the back housing in society to remove the dorsum embrace near the charging port.
Side by side you volition need to disconnect 5 connections total, in order to remove the mother board. Y'all have three of these connections located at the center of the motherboard. Note- the larger connection is over lapping ane connection. At the top on either side there are 2 more than connections. Now yous can remove the motherboard

Using your pentalobe screwdriver you will need to remove 5 screws located in the image below.

Remove the safety covering the vibrating motor at the superlative right side of the device, on top of where the battery would go.
Right above the photographic camera lens you will need to remove the blackness round noise blocking microphone.
Lift upwards the orange tape belongings the flex cables outward carefully
Next lift upward and remove the circular orange flex cablevision at the bottom of the device, this is the microphone

Using your condom open up pry tool you tin can brainstorm separating the screen assembly from the device. First on the sides of the device and piece of work your fashion effectually slowly separating the screen assembly. Make sure not to pull the screen associates out without removing the Flex ribbon cables.
When you begin gently feeding the cables through the slot in the front housing, yous will need to remove a pocket-size thread of black adhesive covering the cables directly side by side to the slot.
Finish feeding the cables through and you lot then you lot are ready to supercede the LCD and touch screen digitizer.

Notice:

Repairs Universe's guides are foradvisory purposes simply. Please click here for details.

Repair Guides

Alcatel Idol 4S Repair Guides

RepairsUniverse is an independent company and is in no way affiliated with Apple, Amazon, Asus, HTC, LG Electronics, Motorola, Nokia, Microsoft, OnePlus, Samsung. Repairs Universe is a third party replacement parts wholesaler of high-quality LCD screen, impact glass and digitizer screen replacements and repair parts for iPhone, iPad, Blackberry, PSP, Zune, Droid, HTC, Nokia and many other cell phones.

Source: https://www.repairsuniverse.com/blogs/repair-guides/blackberry-z10-repair-guide

Posted by: stampernernat.blogspot.com